12 ماه گارانتی
12 ماه گارانتی
10 سال خدمات
پس از فروش
10 سال خدمات
پس از فروش
پرداخت در محل
مشهد و تهران
پرداخت در محل
مشهد و تهران
ضمانت اصالت کالا
ضمانت اصالت کالا
Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes and supports standardization of I/O cabinetry ensuring automation projects are delivered on-time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel.
The AIS885 is an Analog Input Signal Conditioning Module (16 bit) for use in High Integrity applications (certified for SIL3) supporting 2/3/4-wire devices (1.2 amp) and HART communications.
Features and benefits
Analog input for 2-wire, 3-wire or 4-wire field devices, powered by AIS885
Signal range: 4…20 mA
Can be used in hazardous areas
Certified for Functional safety
Field power sourced from the power injection
Short circuit proof, configurable current limit 0.1 to 1.2 A
Transmitter power current limited to 25 mA (for 2-wire field devices; input current
limitation for SCM pin 2)
16 bit A/D converter resolution
Galvanic isolation
Protected against wrong wiring (±35 V) between all terminals
Hardware filter, rise time 1 ms
Software filter configurable through parameters
Diagnostics:
Loop supervision (open circuit and short circuit)
Internal hardware supervision
Communication supervision
Device malfunction low, under-range, over-range and device malfunction high
detection
Internal power supervision
Power injection supervision
LED indicators:
Status (S)
Primary (P)
Single loop granularity – each SCM handles a single channel
Supports hot swap
Mechanical locking slider which turns off field device power and/or output before removal
Field disconnect function which can galvanically separate the field loop wiring from the SCM during commissioning and maintenance
All SCMs have electronic current limitation
Mechanical keying to prevent insertion of wrong module type after commissioning
24V DC powered through Modulebus
Configurable through parameters
LED indicators on the SCM indicate the operational state of the module. (3BSE080108R1)
وزن | 73 کیلوگرم |
---|---|
ابعاد | 77.9 × 9.8 سانتیمتر |
نوع محصول | select-io |
HART | Yes |
SOE | N/A |
Redundancy | Yes |
Hot swap | Yes |
High integrity | Yes |
Intrinsic safety | No |
محصولات مرتبط
توضیحات محصولات
Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes and supports standardization of I/O cabinetry ensuring automation projects are delivered on-time and under budget. A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel.
The AIS885 is an Analog Input Signal Conditioning Module (16 bit) for use in High Integrity applications (certified for SIL3) supporting 2/3/4-wire devices (1.2 amp) and HART communications.
Features and benefits
Analog input for 2-wire, 3-wire or 4-wire field devices, powered by AIS885
Signal range: 4…20 mA
Can be used in hazardous areas
Certified for Functional safety
Field power sourced from the power injection
Short circuit proof, configurable current limit 0.1 to 1.2 A
Transmitter power current limited to 25 mA (for 2-wire field devices; input current
limitation for SCM pin 2)
16 bit A/D converter resolution
Galvanic isolation
Protected against wrong wiring (±35 V) between all terminals
Hardware filter, rise time 1 ms
Software filter configurable through parameters
Diagnostics:
Loop supervision (open circuit and short circuit)
Internal hardware supervision
Communication supervision
Device malfunction low, under-range, over-range and device malfunction high
detection
Internal power supervision
Power injection supervision
LED indicators:
Status (S)
Primary (P)
Single loop granularity – each SCM handles a single channel
Supports hot swap
Mechanical locking slider which turns off field device power and/or output before removal
Field disconnect function which can galvanically separate the field loop wiring from the SCM during commissioning and maintenance
All SCMs have electronic current limitation
Mechanical keying to prevent insertion of wrong module type after commissioning
24V DC powered through Modulebus
Configurable through parameters
LED indicators on the SCM indicate the operational state of the module. (3BSE080108R1)
توضیحات تکمیلی
وزن | 73 کیلوگرم |
---|---|
ابعاد | 77.9 × 9.8 سانتیمتر |
نوع محصول | select-io |
HART | Yes |
SOE | N/A |
Redundancy | Yes |
Hot swap | Yes |
High integrity | Yes |
Intrinsic safety | No |
نقد و بررسیها
هنوز بررسیای ثبت نشده است.