12 ماه گارانتی
12 ماه گارانتی
10 سال خدمات
پس از فروش
10 سال خدمات
پس از فروش
پرداخت در محل
مشهد و تهران
پرداخت در محل
مشهد و تهران
ضمانت اصالت کالا
ضمانت اصالت کالا
Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes and supports standardization of I/O cabinetry ensuring automation projects are delivered on-time and under budget.
A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel.
The DOS810 is a Digital Output (24V / 0.6A) Signal Conditioning Module supporting 2-wire devices.
Features and benefits
Digital output for 2-wire field devices
24 V / 0.6 A current sourcing
Can be used in hazardous areas
Field power sourced from the power injection
Short circuit proof, electronically current limited to 0.6 A
Built-in inductive load suppression, free-wheeling diode
Galvanic isolation
Protected against wrong wiring
Diagnostics:
Loop supervision (open circuit and short circuit)
Hardware error supervision
Communication supervision
Internal power supervision
Power injection supervision
OSP (Output Set to Predetermined value)
Single loop granularity – each SCM handles a single channel
Supports hot swap
Mechanical locking slider which turns off field device power and/or output before removal.
Field disconnect function which can galvanically separate the field loop wiring from the SCM during commissioning and maintenance.
All SCMs have electronic current limitation
Mechanical keying to prevent insertion of wrong module type after commissioning.
24V DC powered through Modulebus
Configurable through parameters
LED indicators on the SCM indicate the operational state of the module (3BSE078768R1)
وزن | 73 کیلوگرم |
---|---|
ابعاد | 77.9 × 9.8 سانتیمتر |
نوع محصول | select-io |
HART | N/A |
SOE | N/A |
Redundancy | Yes |
Hot swap | Yes |
Intrinsic safety | No |
محصولات مرتبط
توضیحات محصولات
Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes and supports standardization of I/O cabinetry ensuring automation projects are delivered on-time and under budget.
A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel.
The DOS810 is a Digital Output (24V / 0.6A) Signal Conditioning Module supporting 2-wire devices.
Features and benefits
Digital output for 2-wire field devices
24 V / 0.6 A current sourcing
Can be used in hazardous areas
Field power sourced from the power injection
Short circuit proof, electronically current limited to 0.6 A
Built-in inductive load suppression, free-wheeling diode
Galvanic isolation
Protected against wrong wiring
Diagnostics:
Loop supervision (open circuit and short circuit)
Hardware error supervision
Communication supervision
Internal power supervision
Power injection supervision
OSP (Output Set to Predetermined value)
Single loop granularity – each SCM handles a single channel
Supports hot swap
Mechanical locking slider which turns off field device power and/or output before removal.
Field disconnect function which can galvanically separate the field loop wiring from the SCM during commissioning and maintenance.
All SCMs have electronic current limitation
Mechanical keying to prevent insertion of wrong module type after commissioning.
24V DC powered through Modulebus
Configurable through parameters
LED indicators on the SCM indicate the operational state of the module (3BSE078768R1)
توضیحات تکمیلی
وزن | 73 کیلوگرم |
---|---|
ابعاد | 77.9 × 9.8 سانتیمتر |
نوع محصول | select-io |
HART | N/A |
SOE | N/A |
Redundancy | Yes |
Hot swap | Yes |
Intrinsic safety | No |
نقد و بررسیها
هنوز بررسیای ثبت نشده است.