12 ماه گارانتی
12 ماه گارانتی
10 سال خدمات
پس از فروش
10 سال خدمات
پس از فروش
پرداخت در محل
مشهد و تهران
پرداخت در محل
مشهد و تهران
ضمانت اصالت کالا
ضمانت اصالت کالا
Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes and supports standardization of I/O cabinetry ensuring automation projects are delivered on-time and under budget.
A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel.
The AOS880 is an Analog Output Signal Conditioning Module (16 bit) for use in High Integrity applications (certified for SIL3) supporting 2-wire devices and HART communications.
Features and benefits
Analog output for 2-wire field devices
Signal range: 4…20 mA
Can be used in hazardous areas
Certified for Functional safety
Transmitter power current limited to 30 mA
16 bit A/D converter resolution
Channel to channel galvanic isolation
Configurable output rise/fall times (down to 1ms; with HART down to 20 ms)
Safe state shutdown (0 V) in case of internal failures or lost communication.)Protected against wrong wiring
Configurable software filter
Diagnostics:
Loop supervision (open circuit and short circuit)
Hardware error supervision
Communication supervision
Internal power supervision
Support of HART field devices (up to HART application layer rev. 7):
HART Pass-Through
Cyclic read of up to two HART Device Variables
HART Device Validation
Single loop granularity – each SCM handles a single channel
Supports hot swap
Mechanical locking slider which turns off field device power and/or output before removal.
Field disconnect function which can galvanically separate the field loop wiring from the SCM during commissioning and maintenance.
All SCMs have electronic current limitation
Mechanical keying to prevent insertion of wrong module type after commissioning.
24V DC powered through Modulebus
Configurable through parameters
LED indicators on the SCM indicate the operational state of the module.
Certified for SIL3 (3BSE074055R1)
وزن | 73 کیلوگرم |
---|---|
ابعاد | 77.9 × 9.8 سانتیمتر |
نوع محصول | select-io |
HART | Yes |
SOE | N/A |
Redundancy | Yes |
Hot swap | Yes |
High integrity | Yes |
Intrinsic safety | No |
محصولات مرتبط
توضیحات محصولات
Select I/O is an Ethernet networked, single channel granular I/O system for the ABB Ability™ System 800xA automation platform. Select I/O helps decouple project tasks, minimizes the impact of late changes and supports standardization of I/O cabinetry ensuring automation projects are delivered on-time and under budget.
A Signal Conditioning Module (SCM) performs the necessary signal conditioning and powering of the connected field device for one I/O channel.
The AOS880 is an Analog Output Signal Conditioning Module (16 bit) for use in High Integrity applications (certified for SIL3) supporting 2-wire devices and HART communications.
Features and benefits
Analog output for 2-wire field devices
Signal range: 4…20 mA
Can be used in hazardous areas
Certified for Functional safety
Transmitter power current limited to 30 mA
16 bit A/D converter resolution
Channel to channel galvanic isolation
Configurable output rise/fall times (down to 1ms; with HART down to 20 ms)
Safe state shutdown (0 V) in case of internal failures or lost communication.)Protected against wrong wiring
Configurable software filter
Diagnostics:
Loop supervision (open circuit and short circuit)
Hardware error supervision
Communication supervision
Internal power supervision
Support of HART field devices (up to HART application layer rev. 7):
HART Pass-Through
Cyclic read of up to two HART Device Variables
HART Device Validation
Single loop granularity – each SCM handles a single channel
Supports hot swap
Mechanical locking slider which turns off field device power and/or output before removal.
Field disconnect function which can galvanically separate the field loop wiring from the SCM during commissioning and maintenance.
All SCMs have electronic current limitation
Mechanical keying to prevent insertion of wrong module type after commissioning.
24V DC powered through Modulebus
Configurable through parameters
LED indicators on the SCM indicate the operational state of the module.
Certified for SIL3 (3BSE074055R1)
توضیحات تکمیلی
وزن | 73 کیلوگرم |
---|---|
ابعاد | 77.9 × 9.8 سانتیمتر |
نوع محصول | select-io |
HART | Yes |
SOE | N/A |
Redundancy | Yes |
Hot swap | Yes |
High integrity | Yes |
Intrinsic safety | No |
نقد و بررسیها
هنوز بررسیای ثبت نشده است.